Weighing Systems for Construction Industry

Home
Applications
Building

Weighing Systems for

Construction Industry

Weighing systems are used in the construction sector in the field of sensors for monitoring the status of some infrastructures and in the field of machinery. The load cells are installed inside the reinforced concrete to capture constantly its state and report any anomalies. In addition, Pavone industrial electronic weighing solutions are installed in advanced railway systems.

Weighing solutions for the construction sector

Do you need help to purchase our products?

Load Cells Compression Load Cells

CMH

The CMH compression load cell is made of stainless steel and it guarantees precision, strength and maximum resistance to impacts and overloads. The CMH cell has been specially designed for the industrial weighing of silos, tanks and ladles and it is used mainly in the food, chemical, pharmaceutical and steel industries. The product CMH can be customized according to customer needs, for example the compensated temperature range can be extended to -10 ÷ + 90 ° C.

Load Cells Pin Load Cells

PSPRX

The PSPRX pin load cell is made of stainless steel and offers maximum resistance to impacts and overloads. The operation of the PSPRX load cell is double-ended shear beam. The PSPRX cell is insensitive to side loads and it has been designed for shooting, weighing or anti-overhead systems for overhead cranes. The PSPRX pin load cell can be customized and it has a "high temperature" version.

Load Cells Double Shear Beam Load Cells

DDR

The DDR double shear beam load cell made of stainless steel and with fully welded hermetic seal, is suitable for weighing tanks and silos and has a 12 m shielded 6-conductor cable for electrical connection. The DDR cell is easy to install and has a high linearity and low mechanical profile. Furthermore, it is also available in a high temperature version and can be customized.

Weighing Instrumentation Weight Transmitters

DAT 1400

The DAT 1400 weight transmitter has a mechanical keyboard, removable screw terminal blocks and a peak hold function for dynamic measures. It has the ability to integrate different options based on customer needs. For example, among the options there are the analog input which can be in tension or electrical and the RS485 connection to external smart junction box. The Software Optimation is given for free. This Software allows you to run certain activities such as calibration or monitoring directly from your computer. The Optimation software is provided by Pavone Systems and guarantees a perfect instrument run.

Weighing Instrumentation Weight Indicators

MCT 1302

The MCT 1302 touch screen weight indicator is ideal for all types of weighing, in particular for static weighing and loading / unloading and multi-component dosing. It is easy to install and use and can be customized as needed. MCT 1302 has a multilingual menu, a touch screen keyboard, removable screw terminal blocks (3.81mm pitch), internal data memory of 64 Kbytes expandable up to 1024 Kbytes and simultaneous availability of Fieldbus and analogue output. The Software Optimation is given for free. This Software allows you to run certain activities such as calibration or monitoring directly from your computer. The Optimation software is provided by Pavone Systems and guarantees a perfect instrument run.

Weighing Instrumentation Weight Transmitters

DAT 100 RS485

The DAT 100/RS485 product is a weight transmitter which guarantees high performance and long-term reliability. Its small width makes it possible to position a large number of transmitters inside the electrical automation panels. DAT 100/RS485 weight transmitter has an interface with intrinsically safe barriers for use in hazardous areas. It has two red status LEDs, 3 mechanical buttons behind the red door and screw terminal blocks.

Weighing Instrumentation Weight Transmitters

DAT 200 Profibus

The weight transmitter DAT 200 Profibus guarantees high performance and long-term reliability. Configuration and calibration can be set up directly from the front panel. The weight transmitter DAT 200 Profibus can be connected directly to the Profibus DP fieldbus. The contained dimensions allow to place a large number of transmitters within the electrical panels automation. The DAT 200 Profibus product is interfaced with Intrinsically safe barriers for use in hazardous areas. It has two red status LEDs, 3 mechanical buttons behind the red door and screw terminal blocks.

Weighing Instrumentation Weight Transmitters

UWT 6008

The UWT 6008 weight transmitter comes from the Pavone Systems experience. It is a unique product in the weight transmitter family and is ideal for all industrial applications where it is necessary to know the load distribution on the different cells. It is able to monitor all load cells and generate alarms due to excessive cell signal drift, missing connections, failure of one of the cells, unbalanced weight distribution. The emulative control allows the continuity of work of the weighing system even in case of failure on one of the load cells, up to the replacement of the same. The Software Optimation is given for free. This Software allows you to run certain activities such as calibration or monitoring directly from your computer. The Optimation software is provided by Pavone Systems and guarantees a perfect instrument run.

Do you work in the construction sector?

Our technical team is at your disposal so as to help you choose among our industrial electronic weighing systems.

Solutions since 1963

Pavone Weighing Systems produces electronic components for the main industrial sectors of weighing and measurement.

Have a look at all industrial applications