The weight transmitter DAT S 400 is a high quality stainless steel weighing instrument, which can be costumized. Configuration and calibration can be set up both from the front panel and the serial port. The DAT S 400 solution has an upload and download function for programming, a peak hold function for dynamic measures and many other useful options that customers can choose. PWS: 41/2017
Technical Specifications in PDF
| Optional power supply: 115 / 230 Vdc 50/60 Hz |
| Measuring range: -0.5 ÷ +3.5 mV/V (optional -3.9 ÷ +3.9 mV/V) |
| Input sensitivity: 0.02 µV/count |
| Full scale non-Linearity: < 0.01 % full scale |
| Gain drift: < 0.001 % full scale/°C |
| A/D Converter: 24 bit |
| Visible resolution (in divisions): > 60000 |
| Decimal figures range: 0 ÷ 3 |
| Temperature range: -10 ÷ +40 °C |
| Storage temperature: -20 ÷ +50°C |
| Filter: 0.1 ÷ 25 Hz |
| Logic output: 2 outputs (clean contact) Max 24 Vdc/100 mA cad. |
| Logic input: 2 optoisolated 24 Vdc PNP (External voltage) |
| Serial port: USB, RS232C o RS422/RS485 with ASCII or Modbus RTU protocols |
| Analog optional output: Optoisolated 16 bit, Tension: 0 ÷ 5 or 0 ÷ 10 V (R >10 K Ohm), Current: 0 ÷ 20 o 4 ÷ 20 mA (R < 300 Ohm), Linearity: 0,03 of full scale |
| Power supply: 24 Vdc ±15 % - absorbed power 5 W |
| Regulatory compliance: EN61326-1, EN55011, EN55014 for EMC; EN61010-1 for electrical security |
| Baud rate: 2400, 9600, 19200, 38400, 115200 adjustable |
| Transmission distance: 15m (RS232C), 1000m (RS422; RS485) |
| Fieldbus: Profibus, Devicenet, Profinet, Ethernet, Ethernet IP |
| Trasducer input voltage: 5 V (max 6 load cells 350 Ohm) |
deutsch
français
español
italiano
हिन्दी
