The PSTR tension load cell is made of stainless steel and is ideal for tensile loads and suspended loads, for measuring tensile forces, for dynamometric measurements and as a load limiting device for lifting systems combined with our instruments. The PSTR cell has a 10-meter shielded 4-conductor cable. PWS: 29/2014
Technical Specifications in PDF
| Rated Load (RL): 5, 10, 20 t |
| Combined error: < ±0.03 % RO |
| Repeatability: ±0,015 % RO |
| Creep (30 minutes): 0,03 % RO |
| Safe overload: 150 % RL |
| Ultimate overload: > 300 % RL |
| Material: Stainless steel |
| Degree of protection: IP68 |
| Deflection: 0.3 mm |
| Compensated Temperature: -10°C ÷ +50°C |
| Temperature range: -20°C ÷ +70°C |
| Temperature effect on zero balance: ±0.005 % RO/°C |
| Temperature effect on output: ±0.003 % RO/°C |
| Rated output RO: 2 mV/V ±0.1 % |
| Zero balance: ±1 % |
| Insulation resistance: > 5000 MOhm |
| Input resistance: 350 Ohm ±5 |
| Output resistance: 350 ±5 Ohm |
| Recommended input: 5 ÷ 15 Vdc/ac |
| Maximum supply voltage: 15 Volt |
| Cable Lenght: 10 m |
| Temperature effect on full scale: 0.003% /°C |
deutsch
français
español
italiano
हिन्दी
