The off center load cell PS19 is made of stainless steel and has been designed for the construction of scales for electromedical equipment and for dosing systems. The single point cell PS19 can be customized: the load capacity can vary from 250 kg to 400 kg and the dimensions of the plate can vary from 600 x 600 mm to 800 x 800 mm for cells with a high load capacity. PWS: 37/2014
Technical Specifications in PDF
| Rated load (RL): 15, 20, 30, 50, 75, 120, 200, 250, 350, 400 Kg |
| Combined error: < ±0.017 % RO |
| Repeatability: < ±0.010 % RO |
| Creep (30 minutes): ±0.016 % RO |
| Safe overload: 150 % RL |
| Ultimate overload: 200 % RL |
| Material: Stainless steel |
| Degree of protection: IP68 |
| Accuracy class: 3000 OIML |
| Deflection: 0.3 ÷ 0.5 mm |
| Compensated Temperature: -10 ÷ +40 °C |
| Temperature range: -20 ÷ +70 °C |
| Temperature effect on zero balance: < ±0.01 % RO/5°K |
| Temperature effect on output: < ±0.006 % on output/5°K |
| Rated output RO: 2.0 ±0.2 mV/V |
| Zero balance: < ±2 % RO |
| Insulation resistance: > 5000 MOhm |
| Input resistance: 400 ±20 Ohm |
| Output resistance: 350 ±3 Ohm |
| Recommended input: 5 ÷ 15 Vcc/ca |
deutsch
français
español
italiano
हिन्दी
