The compression load cell PS24 is made of stainless steel and hermetically sealed. The compression load cell PS24 is easy to install and may be used in several weighing systems, such as tank and silage weighing systems with low profile requirements. As all compression load cells, PS24 is suitable for fixed and perpendicular loads. PWS: 07/2018
Technical Specifications in PDF
| Rated Load (RL): 100 kg - 10 t, 15 t, 35 t, 50 t, 100 t |
| Combined error: < ±0.05 % RO |
| Repeatability: < ± 0,015 % RO |
| Creep (30 minutes): ±0.048 % RO |
| Service load: 150 % RL |
| Ultimate overload: 250 % RL |
| Minimum Load: 0 % RL |
| Material: Stainless steel |
| Degree of protection: IP68 |
| Accuracy class: 1000 OIML |
| Deflection: < 0.6 mm |
| Compensated Temperature: -10 ÷ +40 °C |
| Temperature range: -50 ÷ +70°C |
| Temperature effect on zero balance: < ±0.01 % RO / 5°C |
| Temperature effect on output: < ±0.018 % RO/5°C |
| Rated output RO: 2 mV/V ±0,1 % |
| Zero balance: ±2 % RO |
| Insulation resistance: > 5000 MOhm |
| Input impedance: 800 ±30 Ohm |
| Maximum input voltage: 15 V |
| Nominal input voltage: 10 V |
| No load output: ±2 % RO |
| Output impedance: 705 ±5 Ohm |
deutsch
français
español
italiano
हिन्दी
