The BLH NOBEL KIS 1 load cell is extremely precise and robust and it is resistant to very high lateral forces. The KIS 1 cell is easy to install and has a moveble loading point and a 10 meter 4-wire shielded cable. KIS 1 load cell has a wide range of application: large silos and scrap baskets, reactors and mixers, conveyor belts and high capacity force measurement systems. KIS 1 load cell is also available in ATEX version certified for use in explosive atmospheres. PWS: 11/2018
Technical Specifications in PDF
| Rated load RL: 50, 100, 200, 300, 500 kN |
| Combined error: ±0.03 % RO |
| Repeatability: ±0.01 % RO |
| Creep (30 minutes): ±0.04 % RL |
| Safe overload: 200, 150 for 300kN and 500kN % RL |
| Ultimate overload: 300% (200% x 300 kN and 500 kN) |
| Safe sideload: 100% (50% x capacity=300kN) |
| Ultimate sideload: 200 % RL |
| Material: 50 kN Stainless steel; 100 - 500 kN stainless steel or yellow chromate steel |
| Degree of protection: IP67 |
| Temperature range: -40 ÷ +80°C (+100°C) |
| Temperature effect on zero balance: ±0.003 % RO/°C |
| Temperature effect on output: ±0.0015 % of output/°C |
| Rated output RO: 2.040 mV/V ±0.1 % |
| Zero balance: ±1 % RO |
| Insulation resistance: > 4 G Ohm |
| Input resistance: 350 ±3 Ohm |
| Output resistance: 350 ±0.5 Ohm |
| Recommended input: 10 Vdc/ac |
| Maximum supply voltage: 18 Vdc/ca |
| Material (accessories): Yellow chromate steel |
| Ultimate uplift (% of capacity): 100% (50% x 300kN and 500kN) |
| Safe uplift: 70 % RL |
deutsch
français
español
italiano
हिन्दी
