MC 353 is an excellent solution for dynamic weighing, 100% customizable by the customer. In fact, the MC 353 dynamic weighing solution can work as a weight loss flow regulator or as a belt flow rate regulator, based on the needs and on the industrial weighing system. MC 353 integrates the variables of weight and speed so as to be able to measure and regulate the flow rate. MC 353 is easy to use, has a touch screen and disposes of a tolerance alarm function. During operation, it is possible to display the main status parameters and the white status LEDs with adjustable intensity. MC 353 is equipped with screw terminal blocks (5.08 mm). MC 353 allows to proceed to the weighing of the material without interrupting the work flow in a simple and efficient way. PWS: 20/2012
Technical Specifications in PDF
| Measuring range: 7,8 mV/V |
| Input sensitivity: 0.02 µV/count |
| Full scale non-Linearity: <0.01 % |
| Gain drift: <0.0003 % of full scale/°C |
| Display: LCD 5.2” (visible area 118mm x 58mm) (l x h) |
| A/D Converter: 24 bit |
| Internal Resolution: 16.777.216 points |
| Trasducer input voltage: 5 Vdc / 120 mA (max 8 load cells 350 Ohm) |
| Degree of protection: IP65 |
| Visible resolution (in divisions): 10000 |
| Divisions value (adjustable): 0.001 ÷ 50 |
| Temperature range: -10 ÷ +50°C |
| Storage temperature: -20 ÷ +60°C |
| Filter: 0.2 ÷ 50 Hz |
| Serial port: RS232, RS422, RS485 |
| Power supply: 24 Vdc 10 W |
| Regulatory compliance: EN61000-6-2, EN61000-6-3, EN61010-1, EN45501 |
| Fieldbus: Profibus DP, Profinet Modbus/TCP |
| Baud rate: 1200 ÷ 115200 adjustable |
| Transmission distance: 15m (RS232C), 1000m (RS422; RS485) |
deutsch
français
español
italiano
हिन्दी
