The Tester 1006 has a simultaneous control function of up to 4 load cells in any weighing system, upload and download function for programming the DAT and MC 302 series instruments, but it can also be used as a Calibrator and Peak detector. It is very useful for the correct mechanical installation and for fault diagnosis. The Tester 1006 is supplied as standard with cable for connection to our junction boxes / sum mod. CEM 4 / C and CGS 4 / C. Simultaneous display of the signal of each individual load cell allows to control the entire weighing system, weight distribution, overloads, faulty cells and faulty connections. OUT OF PRODUCTION. Pavone systems provides a new version of Tester 1006: Tester 1008. PWS: 20/2012
Technical Specifications in PDF
| Measuring range: -3,9 ÷ +3,9 mV/V |
| Full scale non-Linearity: <0.01 % full scale |
| Gain drift: <0.001 % of full scale/°C |
| Display: Graphical 3 " |
| A/D Converter: 24 bits |
| Internal Resolution: > 16,000,000 points |
| Trasducer input voltage: 5 Vdc / 60 mA (max 4 350 Ohm load cells in parallel) |
| Degree of protection: IP54 |
| Visible resolution (in divisions): 50000 |
| Divisions value (adjustable): x1, x2, x5 |
| Decimal figures range: 0 ÷ 3 |
| Temperature range: -10 ÷ +50 °C (max 85% humidity without condensation) |
| Storage temperature: -20 ÷ +70 °C |
| Power supply: 4 AA batteries - Power consumption 5 W |
| Weight: 500 g |
| Accuracy full scale: 0.033 % full scale |
| Load cells connection: 25-pin D-sub connector and cable length 2m |
| Power consumption: 125 ÷ 190 mA |
| Impedance: 350 ÷ 700 Ohm, 300 ÷ 4500 Ohm |
| Input signal cells: -3 ÷ +20.3 mV |
| Voltage power cell: 3 ÷ 12 Vdc |
| Connection to the instruments: 25-pin D-sub connector and cable length 0.5 m |
deutsch
français
español
italiano
हिन्दी
